Concrete mixers need to have what conditions

As one of the two essential elements of the concrete mixing plant, concrete mixer has a vital role. Then, using the concrete mixer needs to have what conditions?
First, a small concrete mixer should be set on a flat place, so that the tire is in floating position in order to avoid loosening during startup. Stirring is preferably carried out prior to commissioning empty, ready to work. Note that, when commissioning test mix drum speed is appropriate, under normal circumstances, empty after loading speed slightly faster than the turn 2-3, such as a difference of more, should be adjusted to move the ratio of wheel and drive wheel.
self-loading concrete mixer
Second, before concrete mixer machine working to carefully check each part to see if the transmission clutches and brakes are flexible and reliable, wire rope for damage, whether good track pulley, Accessible and other parts of lubrication, etc. around. Confirm no problem and then boot up.
Third, if during the boot process, if found to electrical or mechanical failure, it should be discharged more than expected, and other troubleshooting and then start running. Of course, when used, should always check to prevent the occurrence of accidents.
Finally, the concrete mixer after use, wind up its power and lock the switch control box, should not forget to clean up, clean health grounds, allowing machinery to keep clean.